Johns Manville PVC Systems
Built to withstand the test of time, JM's PVC was made to resist the toughest weather conditions and chemicals.
Johns Manville's PVC is a flexible, thermoplastic membrane manufactured using an ultraviolet-resistant polyvinyl chloride. PVC membranes deliver a pliable and durable sheet with excellent weathering characteristics and resistance to harsh chemicals and industrial pollutants.
JM PVC FB with DuPont Elvaloy KEE Polymer
JM PVC FB is a fleece-backed, thermoplastic polyvinyl chloride membrane.
Meets the requirements of ASTM D 4434, Type III
Advanced Solid Phase Polymer Formulation: Uses the optimal amount of DuPont™ Elvaloy® KEE (Ketone Ethylene Ester) polymer to ensure plasticizer retention, extend roof life, and to reduce maintenance costs.
Patented Aramid-Reinforced Edge: Aramid fiber is woven into the fastening side of all full rolls of PVC membrane.
Spunbond 3.8 oz. Polyester Fleece Back Mat: Interlocking, multiplelayer, uniformly arranged continuous filament strands are needle punched with thousands of barbed needles, creating an extremely durable, strong yet light and flexible protection layer.
Non-wicking Reinforced Polyester Scrim: Our fully integrated manufacturing process adds tensile strength and toughness. Due to the non-wicking edge sealant is not required.
Excellent Chemical Resistance: JM PVC is inherently resistant to oils, air conditioning coolants, fuels and grease.
JM PVC SD Plus
Standard (Non Elvaloy KEE) Polyester-Reinforced Thermoplastic Polyvinyl Chloride Membrane
Meets the requirements of ASTM D 4434, Type III
Non-wicking Reinforced Polyester Scrim: Our fully integrated manufacturing process adds tensile strength and toughness. Edge sealant is not a requirement for cut edges.
Excellent Chemical Resistance: JM PVC is inherently resistant to oils, air conditioning coolants, fuels and grease.
Energy Savings: The white membranes provide exceptional reflectivity and emissivity for energy savings.
JM PVC with DuPont Elvaloy
JM PVC is a thermoplastic polyvinyl chloride membrane produce with KEE polymers to provide superior protection.
Meets the requirements of ASTM D 4434, Type III
Advanced Solid Phase Polymer Formulation: Uses the optimal amount of DuPont™ Elvaloy® KEE (Ketone Ethylene Ester) polymer to ensure plasticizer retention, extend roof life, and reduce maintenance costs.
Patented Aramid-Reinforced Edge: Aramid fiber is woven into the fastening side of all full rolls of PVC membrane.
Non-wicking Reinforced Polyester Scrim: Our fully integrated manufacturing process adds tensile strength and toughness. Due to the non-wicking edge, sealant is not required.
Excellent Chemical Resistance: JM PVC is inherently resistant to oils, air conditioning coolants, fuels and grease.
Energy Savings: White, Grey ES, and Sandstone ES membranes provide exceptional reflectivity and emissivity for energy savings.
JM Vapor Barrier SA
Polyethylene-reinforced, self-adhering SBS vapor barrier.
Tri-laminate woven polyethylene, nonslip, UV-protected top surface provides temporary weather protection for 90 days. Provides high tensile strength and puncture resistance.
Self-sealing, high-quality SBS rubber and asphalt blend provides low air and vapor permeability.
Silicone release film allows for ease of self-adhering installation.
Installation Supplies
Johns Manville supplies a full range of necessities for PVC system installation and maintenance, including:
- JM PVC Accessories
- Adhesives, Cleaners and Primers
- Fasteners and Plates
- Insulation and Cover Boards